Categories
advance turbo flasher atf box setup ATF Fasher update ATF JTAG Box Boxes tool updates

ATF box v12.10 released

Advance Turbo Flasher (ATF) box released there software module version v12.10. This update contains with few new addons and improvements.
What inside
ATF box v12.10
Official update notice:
Release Date: March 31, 2015
Firmware Version Required : 11.0.10 or 11.0.12
ATF Box USB Driver Required: 2.10.0.0 – Windows 7/8/8.1 (32-bit and 64-bit)
ATF Box USB Driver Required: 2.8.30.0 – Windows XP (32-bit and 64-bit)

—> eMMC Tool 3.3 (PRO)
—–> Added Support for Samsung eMMC Repair “TOTALLY DEAD 00FF8080” eMMCs (First in The World)
—–> This can repair totally dead Samsung eMMCs which always reply “BUSY” to Normal eMMC Initialization
—–> This Solution Requires an Activation + Special eMMC Socket Adapter
—–> This Solution can be customized to any Samsung eMMC Model with BGA-153/169 or BGA-162 Pinout

P.S. No Regards to NEWBIES who think Reversing 64KB eMMC BOOTROM + 128KB FIRMWARE is hard
—> More Spreadtrum CPU eMMC Test Point Finder Support
—–> Supported Spreadtrum CPU: SC6820i, SC6820ES, SC7715, SC7735S, SC7715A, SC7715T,
—–> SC6815AS, SC8810ES, SC8825, SC8825A
—–> More Info about Spreadtrum eMMC Finder Support Here:
===>>> ATF eMMC Test Point Finder Tutorial <<<===

General Nokia Updates:
BB5 FBUS BOOT Improvements

Added New Lumia Models to Nokia.ini
–> Lumia 430 DS (RM-1099)
–> Lumia 640 DS DTV (RM-1109)
–> Lumia 640 LTE DS (RM-1113)
–> Lumia 435 DS DTV (RM-1114)
–> Lumia 532 DS DTV (RM-1115)

*******************************
ATF JTAG 1.0.14 Build 7528
*******************************

Release Date: March 31, 2015
Firmware Version Required :

ATF Lightning/Nitro: LogiCore 11.0.10
ATF Chrome/GOLD : LogiCore 11.0.10 or LogiCore 11.0.12

Change Log
–> DUAL JTAG Connections now Supported on ATF Chrome/GOLD Boxes
—-> Now you can connect 2 Phones at the same time for ATF Chrome/GOLD Boxes
—-> Connect 1 Phone on “FLASHBUS” port and connect another phone on “EXTENSION” port
–> Initial BroadCom CPU Support
—-> CPU Supported: BCM21654, BCM21654G, BCM21664, BCM21664T, BCM28155, BCM28155T
–> Greatly Improved Qualcomm CPU eMMC Write Speeds
–> Increased Qualcomm CPU eMMC Write Timeouts
–> Added Remove Write Protection BIT for Samsung Brand eMMCs
–> Added Support for SmartGsm EXTENSION Port JTAG Adapter (via LogiCore 11.0.12)
–> Added VBATT 4.0v Output for Powering Phone
—-> Now you don’t need an EXTERNAL Power Supply just in case Phone Battery is Dead
—-> Just connect “VBATT 4.0v” to VBATT (+) POSITIVE of Phone’s Battery Terminal

*** IMPORTANT NOTICE ***

For ATF Chrome/GOLD boxes, JTAG PINOUTS for “FLASHBUS” port and “EXTENSION” port are NOT THE SAME.

FLASHBUS port uses 8-PINS RJ-45,
and the JTAG PINOUT is:

1 – VBATT 4.0V (Optional)
2 –
3 – TRST + SRST
4 – TDO
5 – TDI
6 – TCK
7 – GROUND
8 – TMS

EXTENSION port uses 10-PINS RJ-48,
and the JTAG PINOUT is:

1 – TRST + SRST
2 – VBATT 4.0V (Optional)
3 –
4 – TDO
5 – TDI
6 – TCK
7 –
8 – GROUND
9 – TMS
10 –

Download
Categories
atf box setup ATF flasher update ATF JTAG Box Boxes tool updates

Advance Turbo Flasher (ATF) v11.70 update released


Release Date: September 30, 2014
Firmware Version Required : 11.0.00
ATF Box USB Driver Required: 2.10.0.0 – Windows 7/8/8.1 (32-bit and 64-bit)
ATF Box USB Driver Required: 2.8.30.0 – Windows XP (32-bit and 64-bit)

ATF Network NEW SERVERS
–> Uses Secure OpenSSL
–> Automatically Installs OpenSSL DLLs for 32-bit and 64-bit Machines
–> Optional “Add ATF Servers to Windows hosts File” button
–> Fixed BroadCom Authorize Phone
–> Fixed Auto Update Files

*** ALL ATF Software Below 11.70 WILL NO LONGER WORK WITH ATF NETWORK ***
*** SO FROM NOW ON, PLEASE USE ONLY 11.70 and NEWER ATF SOFTWARE ***

Added Nokia Lumia WP8.1 and Android Dead Boot Repair via eMMC (September 2014 Files)
<<<<<< ALL NOKIA LUMIA/ANDROID DEAD BOOT REPAIR FILES – Direct Links >>>>>>

(ALL First In The World)
Lumia 630 RM-974 01061.00057.14212.40007 4-WIRES ONLY
Lumia 630 RM-976 01061.00042.14174.39005 4-WIRES ONLY
Lumia 630 DS RM-977 01061.00042.14174.39006 4-WIRES ONLY
Lumia 630 DS RM-978 01061.00066.14235.36003 4-WIRES ONLY
Lumia 630 DS RM-979 01061.00042.14174.39001 4-WIRES ONLY
Lumia 635 RM-975 01061.00074.14271.30100 4-WIRES ONLY
Lumia 636 4G RM-1027 01061.00064.14233.03001 4-WIRES ONLY
Lumia 638 4G RM-1010 01061.00062.14216.44001 4-WIRES ONLY
Lumia 530 RM-1017 01068.00023.14295.43001 4-WIRES ONLY
Lumia 530 RM-1018 01068.00023.14295.43002 4-WIRES ONLY
Lumia 530 DS RM-1019 01068.00023.14295.43003 4-WIRES ONLY
Lumia 530 DS RM-1020 01068.00023.14295.43002 4-WIRES ONLY
Lumia 929 RM-927 1028.3566.1417.0047 4-WIRES ONLY
Lumia 930 RM-1045 02061.00066.14353.31008 4-WIRES ONLY
Lumia 930 RM-1087 02061.00066.14353.31002 4-WIRES ONLY
Lumia 1520 RM-937 1028.3562.1402.0018 4-WIRES ONLY
Lumia 1520 RM-938 1028.3562.1402.0001 4-WIRES ONLY
Lumia 1520 RM-939 1028.3562.1402.0002 4-WIRES ONLY
Lumia 1520 RM-940 1028.3562.1407.1001 4-WIRES ONLY

(For Demonstration Purposes Only… ALL SM-G7102 can be UNBRICKED via SDC)
Samsung SM-G7102 Galaxy Grand 2 4.4.2 G7102XXUBNH6 4-WIRES ONLY

*** Take note that “via eMMC” Files are 100% FREE and NO NEED ACTIVATION!

eMMC Tool 2.8 PRO
–> Added CPU Type: “QUALCOMM HALT Type 1”
—–> Very Usefull for NEW Samsung Phones with MSM8974, MSM8226.
—–> Requires only 4 WIRES to Solder to the Phone
—–> NO NEED TO Solder anything to VccQ and Vcc
—–> Tested on SM-G7102 and SM-G7106
–> Added CPU Type: “QUALCOMM HALT Type 2”
—–> Very Usefull for Phones detected as QHUSB_DLOAD/VIP_05C6&PID_9008
—–> Requires only 4 WIRES to Solder to the Phone
—–> NO NEED TO Solder anything to VccQ and Vcc

*** Make sure both RED (CLK) and YELLOW (RCLK) are Connected Together in order to
*** for these new Qualcomm Halt Types to WORK.

For Phones with new eMMC 4.5 and RCLK Support, please make sure you use
YELLOW (RCLK) on the correct TP to ensure correct timing. Example on phone
like SM-P605.

Samsung Unbrick Image Creator 2.2
–> Fixed Bug about not allowing 8GB cards for 8GB Phones
–> Added APQ8060 and APQ8060A Support for SDC Image Creator
—-> Tested on SCH-i200 – Unbricked via SDC

*** Not ALL APQ8060/APQ8060A Phones are supported for SDC Unbrick
*** Only Phones with GUID Partition Tables are supported

New SDC Files Added:
GT-I9200_4.4.2_8GB_I9200XXUDNF1.sdc
GT-I9205_4.2.2_8GB_I9205XXUAMG7.sdc
GT-N7105_4.4.2_N7105XXUFND3.sdc
SM-G7102_4.4.2_8GB_G7102XXUBNH6.sdc
SM-G7102_4.4.2_8GB_G7102XXUBNH3.sdc
SM-G7102_4.4.2_8GB_G7102XXUBNG8.sdc
SM-G900M_4.4.2_16GB_G900MUBU1ANCE.sdc
SM-N900_4.4.2_32GB_N900ZSUDNF3.sdc
SM-N9005_4.4.2_32GB_N9005XXUFNF4.sdc
SM-N900A_4.3_32GB_N900AUCUBMJ5.sdc
SM-P605_4.4.2_16GB_P605XXUCNG1.sdc

Download Them via 4Shared
SAMSUNG SDC FILES by Linus H. – 4shared

[Nokia Android]
–> Added New VID/PID for newer Nokia Android Phones
–> Automatically BLOCKS V2 Flash Files when V1 LIVE Phone is Detected

[BB5 Updates]
–> Faster Nokia BB5 SL3 Authorize Phone

*******************************
ATF JTAG 1.0.12 Build 5634
*******************************

Release Date: September 30, 2014
Firmware Version Required : LogiCore 11.0.00

*** ALL ATFJ Software Below 1.0.12 WILL NO LONGER WORK WITH ATF NETWORK ***
*** SO FROM NOW ON, PLEASE USE ONLY 1.0.12 and NEWER ATFJ SOFTWARE ***

Change Log
–> Uses new ATF Servers
–> Added Support for APQ8060/APQ8060A CUSTOM Read Write eMMC
–> Added Support for External 4.0v Power on VBATT for Phones which need Battery during JTAG
—-> Very Useful for APQ8060/APQ8060A Samsung LTE Phones
—-> Just Connect RJ-45 PIN 1 (VBATT) to Battery (+) of Phone
–> Fixed HALT Timing for newer MSM8225/MSM8225Q SOC Revisions
—-> This will now work on Nokia X, XL and X+ which was “No Devices Found” Before
–> Added ALL BOOT Versions for BOOT REPAIR Nokia X, XL and X+ (via JTAG)

Added for Nokia (All First In The World):
Nokia X RM-980 [10.0.3] [FULL BOOT]
Nokia X RM-980 [11.1.1] [FULL BOOT]
Nokia X RM-980 [1.1.2.2] [FULL BOOT]
Nokia X RM-980 [1.2.4.1] [FULL BOOT]
Nokia X RM-980 [1.2.4.2] [FULL BOOT]
Nokia X RM-980 [1.2.4.3] [FULL BOOT]
Nokia X V2 RM-980 [1.1.3.20] [FULL BOOT] for only phones v2
Nokia X V2 RM-980 [1.2.4.21] [FULL BOOT] for only phones v2
Nokia X RM-981 [1.1.0.1] [FULL BOOT]
Nokia X RM-981 [1.1.1.0] [FULL BOOT]
Nokia X RM-981 [1.2.2.2] [FULL BOOT]
Nokia X+ RM-1053 [1.1.0.2] [FULL BOOT]
Nokia X+ RM-1053 [1.2.2.1] [FULL BOOT]
Nokia XL RM-1030 [1.1.0.6] [FULL BOOT]
Nokia XL RM-1030 [1.1.1.0] [FULL BOOT]
Nokia XL RM-1030 [1.1.1.4] [FULL BOOT]
Nokia XL RM-1030 [1.2.1.2] [FULL BOOT]
Nokia XL RM-1030 [1.2.3.1] [FULL BOOT]
Nokia XL RM-1030 [1.2.3.2] [FULL BOOT]

Nokia XL V2 RM-1030 [1.1.2.20] [FULL BOOT] for only phones v2
Nokia XL V2 RM-1030 [1.1.3.21] [FULL BOOT] for only phones v2
Nokia XL RM-1042 [1.1.0.0] [FULL BOOT]
Nokia XL RM-1042 [1.2.1.1] [FULL BOOT]

Added for Samsung:
SGH-i727 FULL BOOT 4.1.2
SGH-i200 FULL BOOT 4.1.2 – (First In The World)

*** You can download these Files via ATFJ.exe —> Help —> Updates

Download
Categories
atf box setup ATF flasher update ATF JTAG Box Boxes tool updates

ATF box update v10.40 and ATF JTAG 1.04 released

Advance Turbo Flasher (ATF) present  update their main ATF Nokia service module  10.40 and newbie ATF JTAG module v1.04.
Note: Firmware Version Required : 10.3.80
What’s new?
[ATF JTAG]
* Unlock Lumia WP7 Phones via Reading PIN and PUK Codes
Supported Models:
Lumia 610 : RM-835
Lumia 610 : RM-849
Lumia 610C : RM-835
Lumia 510 : RM-889
Lumia 510 : RM-898
Lumia 505 : RM-923
* Boot Repair WP7 Phones
Supported Models:
Lumia 610 : RM-835
Lumia 610 : RM-849
Lumia 610C : RM-835
Lumia 510 : RM-889
Lumia 510 : RM-898
Lumia 505 : RM-923
* Factory Boot Repair Cherry Mobile Phones
Supported Models:
Skyfire 2.0
Flame 2.0
Flare (S100) – Updated with Corrected JTAG Pinouts
Download AFP Files Here: CHERRY_MOBILE
* New ATF JTAG Exe version 1.04
ATF JTAG is Now Automatically Activated if ATF Box has 39 ATF JTAG Credits
[WP7 eMMC TP]
* Added 610 Qualcomm OSBL write via eMMC TP
* Added 610C Qualcomm OSBL write via eMMC TP
[WP7 eMMC Direct]
* Added PERMANENT UNLOCK for WP7 Phones Unlocked via PIN or PUK Codes (Disable RE-Locking)
Supported Models:
Lumia 800 – Qualcomm OSBL must be written to phone first (via USB Flashing)
Lumia 800C – Qualcomm OSBL must be written to phone first (via USB Flashing)
Lumia 710 – Qualcomm OSBL must be written to phone first (via USB Flashing)
Lumia 610 – Qualcomm OSBL must be written to phone first (via JTAG or eMMC TP)
Lumia 610C – Qualcomm OSBL must be written to phone first (via JTAG or eMMC TP)
Lumia 510 – Qualcomm OSBL must be written to phone first (via JTAG or eMMC TP)
Lumia 505 – Qualcomm OSBL must be written to phone first (via JTAG or eMMC TP)
* Added Restore DLOAD to Lumia 610
* Added Restore DLOAD to Lumia 610C
[General Updates]
* Complete Product Listing in Nokia.ini as of November 27, 2013)
* Complete WP7/WP8 Variant Listing as of November 27, 2013
[Bug Fixes]
* Removed eMMC Communication Debug Messages
* Removed WP7 Communication Debug Messages
Download