Categories
Box Boxes tool updates Cyclone

Cyclone box no TP – USB only rooting for lumia 800, 800C update released

Cyclone box present a great solution for USB rooting Lumia 800 and 800C, this method giving attractive and it is very easily can be root lumia listed models.
Cyclone installer : CycloneBoxInstaller.exe
Here official update notice and tricks,

– Added WORLD FIRST, USB ONLY, NO TP ROOTING FOR RM-801 LUMIA 800
– Added WORLD FIRST, USB ONLY, NO TP ROOTING FOR RM-802 LUMIA 800C

All NOKIA DLOAD OSBL loaders are supported (even latest one!)

Instructions:
1. Run Cyclone, it will be auto-updated
2. Update your Box Firmware to v2.20
3. Go to WP7 -> Simlocks Tab
4. Select Product and click ROOT!

It should go this way:

“Lumia No TP Root Procedure Started…

If phone is alive, It will be automatically swithced to OSBL mode.
If software can’t switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT…
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
Switching to RAW Mode…
[Nokia USB Connectivity]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 2012-02-17 14:40:05
OSBL Bootloader Ready
USB&UART Tracing set
RSA Signature Calculated for QCB Boot, Writing…
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2011-09-28 15:52:12
Signer S/N: 23
Signer User ID: 10046114
Auth Level: Care
Data Encryption: 0
Image Index: 0
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Certificate Accepted
[ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200
Write taken 0.358s (Average speed: 19462,61kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE…
Restore OK
Restarting MCU…
Rooting Finished!”

After rooting, Qualcomm Bootloader is installed. That means phone will be detected as Mass Storage Device, and you will have full access to eMMC.

Because patching is not good solution, we will add some good news aswell in next days
However, if you need simlock patching badly you can use some free tools around to patch AMSS (i.e. NSS).

Release Notes:
1. Supported products: Cyclone Box Classic, Cyclone Box Reloaded, Cyclone Key
2. Firmware Required v2.20
3. Need No TP Activation, is COMPLETLY FREE for all Cyclone Key users, for rest you need have 60 credits on your account and your box will be automatically activated (credits will not be withdrawn from box anyway, this is just threshold).
4. We also have solution to completly root rest of lumias, including 610, 610nfc, 900, etc… however it will be released ONLY if this solution WILL NOT BE COPIED. If somebody copy solution – it will be kept private.
5. No need new installer.

Categories
Boxes tool updates Cyclone Tools

Cyclone v1.0.1.684 Released, One-click FREE Simlock CS Repair for XGold213 Added!!

Cyclone v1.0.1.684
 
– Added
FIRST IN THE WORLD, FREE One-Click Contact Service repair for XGold213 Based Phones. No need to buy RPL! Just click, and in 1 second your CS will go (if CS cause is bad simlock, and reason of this is NCK reset by free softs).
– Memory fragmentation issues fixed during Lumia Flashing
– Cursor problems fixed
– XP Usb support partially fixed
– Minor changes and bugfixes

Just run Cyclone, and autoupdate will fetch new version automatically.

Categories
Box Boxes tool updates Cyclone Tools

Cyclone Box Installer v1.21 Released

Hi to all, new Installer for Cyclone Box is ready to download.What’s new?
Installer v1.21
25.06.2012
– New BB5 FBUs/USB Loaders v12.08.00 Added
– Qualcomm Based Products support added (Lumia 800, 610, etc)
– Normal mode Flashing is supported
– Dead-mode flashing is supported
– Downgrade is supported
– Support for Multi-CNT Qulacomm Configurations
– Support secure-erase USER Area – this takes about 15-25 minutes
– Basic read info including battery information etc for Lumia products
– Automatic Variant selection for Lumia products
– Cross-flash is supported, if Public Key hash matches

After connecting product in Normal mode, Zune drivers must be installed. Take them from C:Program FilesCyclone BoxDriversZuneDrivers
– Flashing drivers will be installed automatically, however on some problems just install them manually from C:Program FilesCyclone BoxDriversLumiaFlashing
– Abort Button improved
– SX4 Default Database updated, added 30 new models
– Nokia Connectivity cables drivers updated to v7.1.78.0
– Minor changes and bugfixes

Where from download?

ALWAYS FRESH installer you can get at: CycloneBoxInstaller.exe
Uninstalling old version is RECOMMENDED before installing this one, however not ordinary.
You don’t need to download Installer MANUALLY. It will be downloaded automatically, if you are having some of last Cyclone build with autoupdate module.

Lumia Flashing drivers will be installed automatically (according to your CPU architecture).
However, ZUNE drivers (when you are attaching phone in Normal mode) need’s to be installed Manually from
C:Program filesCycloneboxDriversZuneDrivers. This you need to ONLY ONCE.

Firmware upgrade is not needed.

Categories
Boxes tool updates Cyclone

CycloneBox Reloaded BlackBerry Module Updated

Firmware v02.02 Released for Classic and Reloaded boxes!

-BlackBerry MEP-11534-010 Added (FIRST IN THE WORLD)!
– Support for MEP-09292-008 Fixed!

Just use “Box Wizard” to upgrade your box Firwmare!
Stay Tuned , Coming back Shortly with More Hot Stuff.

Categories
Boxes tool updates Cyclone mobile flashing software

CycloneBox Reloaded Launched and new Installer v1.20

Cyclone Box Reloaded
Some More Basic Information :

– USB Bus powered only, 5V @ 500mA (2.5W)
– USB 1.0, 1.1, 2.0 and 3.0 Compatible
– Supported Operating Systems: All NT based Windows OS (including x86 and x64 platforms – drivers signed for 64bit) – this includes Windows NT, Windows Xp, Windows Vista, Windows 7, and upcoming
ones
– Lightweight construction
– No Smartcard Connector
– Nokia Flashbus / FBUS RJ48 connector with TX and RX signalling LED. Pinout is UFS/JAF compatible (no need adapters anymore, plug it straight).
– Based on well-tested AVR32 technology in Cyclone Classic, powered by 66MHz 32bit RISC cpu
– Built-in VPP generator for old NOR based phones
– USB signalling led (USB transaction signalling)
– VBAT singalling led (power-up status of Flashbus port)
– Works also as USB dongle for USB-only operations, if USB connectivity with Nokia phones is needed
– Operates 100% standalone (after initial registration)

——————————–

New CycloneBox Installer v1.20 (03.05.2012)

Things which introduced in new Version

– New Faster and reliable Hw introduced (Cyclone Box Reloaded)
– New Loaders v11.50.00 added
– FastMM v4.99 Introduced
– MEP-40488-004 added
– Xgold113 (Dual-sim) RPL write support added- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
– “News” added in main window
– “New Super Easy Downgrade” BB5 method added (Backup,flash,downgrade,restore rpl all just in one click)Tick in before-flash tasks
– Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar – working, red progressbar – error, yellow-paused, etc
– Boot recovery added for all boxes during box wizard
– Added COD->NCK verification upon data generation
– After COD->NCK calculation, NCK codes are automatically stored inside COD file
– New Paths is now addded to default Flash Path Search table (C:UsersxxxxAppData… etc)
– Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.

Improvements

– No need anymore to tick “Old USB flashing method” manually, it’s detected automatically
– When Windows 7 is detected, software is not hidden to tray
– Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
– Automatic smartcard refill when empty addded
– Software is redesigned now. To gain full funcionality YOU DON’T NEED run as “Admin”. This means you can be ensured about our software quality and security – no hidden trojans (as happened before with other products).
– Splash updated
– Box Registration module removed (box wizard introduced)
– Box Maintenance module removed (box wizard introduced)
– Card Maintenance module removed (box wizard introduced)
– The paths is now updated on each sw startup
– Only one copy of Cyclone Box application can be launched now, this improves stability
– “cyclonebox.dll not found” message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
– Skin Stack Updated to v7.62

Bug Fixes

– Windows7 Permission issues fixed (needed “Run as admin” to work properly with autoupdate)
– Fixed Windows7 Save Paths/Settings problem
– BB5 loader problems when skin enbled (ROM refused…etc)
– Access violation on exit fixed
– CBUS Lost Handle Fixed
– “cyclonebox.dll not found” message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
– libeay/ssleay libraries updated to latest one, much more fast and stable
– NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
– Fixed tray issues
– Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
– Improved RPL backup in USB mode (Custom Loader didn’t reset phone to FlashMode, and some backups did contain Superdongle/Simlock data only)
– XGold/Blackberry Service “Credits” renamed to “Counter” (because it is a counter, not real fee-credits), as it puts too much confusion
– “security problem #1” solved on those who copied cyclonebox.dll before
– Fixed interrupted auto-update problems (after restart – this is not valid Win32 application)
– Minor changes and bugfixes

Important Notes

1. If you are using old (Classic) Cyclone Box and having old Card serial number (2009,2010) and after latest
bootloader upgrade, your box can’t enter into bootloader mode, your box boot need Recovery. This will be proceeded AUTOMATICALLY, just use Box Wizard.
2. Box Maintenance, Box Registration, Card Maintenance are removed from this release
3. Your box having 3 update credits from now
4. Box Firmware v02.01 is required, so this update could be operational
5. Use “Box Wizard”. This is one-click tool for box repair (boot recovery), upgrade, activation, registration, smartcard upgrade/initialization, and so on.
6. If you are using Windows 7, autoupdate in old version may fail (fixed already). In case download installer directly, or run SW with Admin privileges.
7. ALWAYS fresh installer you could find at:
Click here <====== Installer
or
Click here <=========Mirror
8. Autoupdate after updating EXE should ask you for downloading and installing latest installer. If something will fail during Autoupdate process, just look at 7 and download Installer manually.

Snapshot
Download
Installer: Click here
 Mirror: Click here