Categories
Flash tricks How to flash mobile flashing software SPD Spreadtrum flashing procedure

How to Flash SPD Smart Phone

How to flash SPD Spreadtrum SmarPhone/Non smartphone. Flashing procedure with Research Down loader R2.9.7002.
Lets follow few easy steps:
2. Extract and open it, and select desire handset PAC file like this. Note: Pac file can be found on search by your desire model.
3. Go to Settings- and don’t change anything on main page.
4. Tab to go Calibration and un-tick all look like given below. After tick finish.
5. Re-insert battery or power off phone. Then Hold Volume down + Power key at the same time for 5 Sec then insert USB cable on PC.
6. Press Start button on ResearchDownload
7. Wait until finish.
Categories
flash software for mobile Flash tricks How to flash Nokia

Nokia 108 rm-944 Flash/Format guide includes pinout for Volcano Box user

Nokia 108 RM-944 is MTK chip phone, So this phone is support for repair software with Chines Boxes which it’s support added. Yes this phone now support with Volcano Box, Look inside for pin-out both USB and RX, TX transmission.
Steps:
  • Cut any Nokia USB cable sold wire on board
  • Update USB driver and do it
  • or Use Nokia 108 cable
 
Nokia 108 pinout
Successful done
Categories
Flash tricks Galaxy S series Galaxy S3 mini repair How to flash Octopus Samsung tool Samsung

How to flash Galaxy S3 mini / I8190 by Octopus box

How to flash I8190 by Octopus
Here this successful flash tutorial for Galaxy S3 mini I8910. Follow under step by step procedure’s.
  1. Select model I9300
  2. Need to be firmware convert (Example file:- I8190XXALJL_I8190OXAALJL_380934_DBT_root.MD5) Then click (FIRMWARE CONVERT) button from Octopus box software Samsung software. Then Select Flash file PDA to .MD5 file
  3.  Then Selected firmware this 2. convert file: I8190XXALJL_I8190OXAALJL_380934_DBT_root.oct
  4. Now Switch your phone to the download mode and connect it with PC.
  5. To put GT-I9300 phone into download mode you have to perform the following steps:
    1. Reconnect phone battery.
    2. Press and hold “Volume – ” + “Home” + “Power” buttons.
    3. When phone turns on press “Volume+” button.
  6. Then tick write firmware

How to samsung mobile flash, Octopas success ful flash, Galaxy S3 mini flash, Samsung mobile flash tutorial, I8190 flash,
Screenshot of Successful flash via Octopus box
Here success Logs 
Firmware write started.
Writing Kernel section…
Kernel section has been written successfully.
Writing CACHEFS section…
CACHEFS section has been written successfully.
Writing HIDDEN section…
HIDDEN section has been written successfully.
Writing Modem section…
Modem section has been written successfully.
Writing STEboot1 section…
STEboot1 section has been written successfully.
Writing STEboot2 section…
STEboot2 section has been written successfully.
Writing SYSTEM section…
SYSTEM section has been written successfully.
Firmware writing successfully completed.