Flash tricks How to flash mobile flashing software SPD Spreadtrum flashing procedure

How to Flash SPD Smart Phone

How to flash SPD Spreadtrum SmarPhone/Non smartphone. Flashing procedure with Research Down loader R2.9.7002.
Lets follow few easy steps:
2. Extract and open it, and select desire handset PAC file like this. Note: Pac file can be found on search by your desire model.
3. Go to Settings- and don’t change anything on main page.
4. Tab to go Calibration and un-tick all look like given below. After tick finish.
5. Re-insert battery or power off phone. Then Hold Volume down + Power key at the same time for 5 Sec then insert USB cable on PC.
6. Press Start button on ResearchDownload
7. Wait until finish.
Android How to hard reset How to remove password SPD unlocking

How to Hard Reset, Remove password, Wipe user data on SPD android (Tutorial)

This guide is especially for safe way hard reset, pattern lock remove, pass code remove, and delete user data from SPD android SC6820 and SC8810 phones.
SPD android is a sensitive android phone, it’s chip is very lower level that’s way it’s harmful for any software damage! like phone hang on brand logo or android logo, not start or fully dead after reset, wipe data from other tool. This is a such a good tricks to repair or unlock, better then others way.
So follow safe way steps:
Extract All Downloaded File
Open ResearchDownload.exe In ResearchDownload_ver_2.9.7002 Folder
Click load Packet

Select Any of SC6820_Wipe_userdata.pac or SC8810_Wipe_userdata.pac

Click Setting

Click OK
Click Start Downloading/play
Turn Off the Phone in 5sec
Press Volume Down Or Up For Bootloader
Insert Usb Cable
Install Driver If needed
And wait
Box Boxes tool updates Firmware flash software for mobile Flash tricks flashing software Miracle MTK SPD

Miracle 1.32 update release


Truly for China Mobile
[25th Nov 2012]

Version :
[ 1.32 ]

Description :

1.MTK Fix 6250D(625A) bug for writing.
2.SPD update finding unlock method.
3.SPD add new flash IC.
4. SPD add 8810/6820 to Repair IMEI and format.
5.SPD support COM port to Repair IMEI.
6.Firmware updated.
7.Fuzzy Logic Function Improved.

Box Boxes tool updates China mobile repair tool MTK Pin find way Pinout RX pin SPD TX pin

China mobile How to boot with RX, TX pinout jumper

Here we make solution for how to Boot chines MTK, SPD base band chips mobile repair by RX and TX pin, and it will support for Flash, Unlock, Security code read, Imei repair etc. China flash box support: Miracle box, Volcano box, GPGDragon box, China king box, Avatar box, IQ Doctor box, Super Doctor Box (MTK-BOX), Mastertools box, Scorpion Box, UCT (Universal China Tool) by ET, McnPro Box,
T-box of this service This method will give you very fast, and smoothly repair solution & don’t need to be cry for break USB connector, base kit. Just find your mobile body where is RX & TX pinout then jumper it to under listed way.

Take a additional JIG from your box’s jig bundle like under 1st photo.RX, TX PIN, Manual Pinout, China RX TX pin out, Auto pinfind, rx tx jumper ways,
Choose like this JIG
RX, TX PIN, Manual Pinout, China RX TX pin out, Auto pinfind, rx tx jumper ways,
Jumper it as same as this jig otherwise you can make jumper any where in this jig pin but must want to be jumper up-down pin because 1st will be work for RX and 2nd TX.

RX, TX PIN, Manual Pinout, China RX TX pin out, Auto pinfind, rx tx jumper ways,
Jumper like this way where is your RX, TX pin in the board just jumper it.

If your mobile phone RX/TX pin out print break? follow here our previous tutorial for how to find RX TX in mobile pcb: Easy way to find RX TX pinout beginner tricks special for china phone

Note: Know about your box / software are available for auto pin-find options now Miracle, Volcano, GPGDragon & China king box support & tested by Mobile Point team, Other-wish you be fail.